• Top class construction and automotive chemicals
Madejski Sp.j. 
ul. Makuszyńskiego 28 
31-752 Kraków

Construction chemicals - +48 12 683 96 11
Automotive chemicals - +48 12 683 96 23 

Troll Free Number



SEALANT HYBRID MS Polymer glue and sealant is a fast curing and durable industrial adhesive. It can be used in many industries such as construction, automotive, shipbuilding, roofing, vacuum systems, containers, tanks.


  • Construction industry, both indoors and outdoors as an elastic adhesive and sealant.  Insulation of window and door elements.
  • Connecting wood with metal constructions.
  • Installation and insulation of facade elements.
  • Roof constructions.
  • Joint sealing and bonding thresholds, parapets, windowsills, decorative strips, insulation boards, decoration corks, glass and mineral wool on wood, chipboard, plaster, brick, concrete, metal, natural stones (marble, granite, etc.).
  • Flexible connection of vibrating constructions.

How to use: Application area must be dry, clean, and free of dust, oil and grease. In order to obtain an even joint and avoid soiling of adjacent areas, use masking tapes removable immediately after joint sealing application. Use expansion joint cord for filling deep gaps. Applied sealant should be immediately smoothened by rubbing down with a wet spatula or finger. Apply using a manual or pneumatic gun intended for sealants. It is recommended to perform a compatibility test before application.

Storage: Store in a dry, cold place and in closed containers at temperatures between +5°C and +25°C.

  • Available in 3 colors: white, black and gray.
  • Expiration date: 16 months from date of manufacture.
  • Packaging: 290 ml and 600 ml (sausage).


Adhesive foam can be used to mount polystyrene panels (XPS or EPS) heat Insulation.

  • Technical specifications: The product hardening in a humid environment and the initial adhesion is achieved within 20 minutes. After about 2 hours hardening.
  • It is resistant to any kind of atmospheric conditions, sea water, steam, and moisture. Working temperature +5°C / +35°C.
  • Can performance up to 12m². Performance is depend on air temperature and humidity and the method of application.

How to use: All substrates must be sound, clean, free of grease and loose dirt (dust, lumps of mortar, old sealants, etc.). Do not use in rain and strong wind. Immediately prior to application moisten the substrate. Prevent possible contamination elements of woodwork and flashings. Thoroughly mix the contents of the can by vigorous shaking (30 times). The box should be at room temperature (if necessary, dip the can in warm water). Screw the can on the gun nozzle and adjust the application. Outlet hold a gun at 2 cm from the surface. Applied directly to the surface of the polystyrene foam adhesive path a diameter of 3 cm around the circumference of plate at a distance of about 5 cm from the edge and in the middle zigzag shaped W. After about 2-4 min. Apply the panel to the wall, press lightly and determine its final position within a max 15 min. (at 20°C and 65% RH). At higher temperature and humidity correction time is reduced, at a lower extend. Wait a few minutes before applying the panels to the wall, allow the initial expansion of the adhesive and facilitate the subsequent correction of the position. Holes and joints between panels to fill the same adhesive (during curing foams and fills the empty spaces). The type and number of mechanical fasteners determines the thermal insulation of the building project Excess material removed mechanically after curing, fresh dirt – GRAFEN PROFESSIONAL PU CLEANING FOAMS.

  • Expiration date: 12 months from date of manufacture.
  • Packaging: 750 ml (sausage).

Kotwa chemiczna:

SPECJALISTYCZNA KOTWA CHEMICZNA PESF to dwuskładnikowa masa żywiczna służąca do kotwienia elementów o najwyższym stopniu odpowiedzialności. Dzięki wysokiej przyczepności do podłoża oraz ogromnej twardości tworzy adhezyjno-kształtowe połączenie o najwyższych parametrach wytrzymałościowych. Kotwienie chemiczne to najbezpieczniejsze zamocowanie zarówno do materiałów pełnych jak i z pustymi przestrzeniami.



najlepsza żywica do pustych przestrzeni może być używana do mocowań w różnych podłożach, zarówno pełnych jak i pustych elementy mogą być kotwione na różnych głębokościach uzyskując wyższe parametry nośności można mocować różnego rodzaju elementy, pręty gwintowane, żebrowane, śruby, haki i inne dostępny w różnych wielkościach opakowań produkt niepalny śladowy, mało wyczuwalny zapach wysoka odporność na związki chemiczne